■ Function
■ Speedometer 0 ~ 360 km / h
Tire periphery Setting (setting range 50 to 210% Units 1%)
speed warning light (setting range 30 ~ 360 km / h set units 1km / h)
■ pointer tachometer 0 ~ 13000 rpm
rotational speed Warning light (Setting range: 1000-13000rpm Setting unit: 100rpm)
Ignition setting (Setting range : 0.5-1-24 )
■ Odo / trip meter, maintenance mileage, gear position
■ Odometer 0 to 999999km
(Display unit: 1km When the range is exceeded, it will return to 0)
Total mileage
User odometer setting (starting distance arbitrary input)
■ Trip meter A, B 0 to 9999.9km
(Display unit: Over 0.1km range) and 0 to return)
trip meter B of display / non-display settings
■ maintenance mileage
mileage you enter, it will be reduced automatically by running.
Maintenance distance (notification mode)
(Setting range: OFF, 500 to 16000km Setting unit: 100km)
* OFF is not displayed.
■ Gear position (Display contents: OFF, all gears)
* OFF is not displayed.
■ Clock, Voltmeter, Thermometer, Fuel gauge
■ Clock (setting range: 12 hours or 24 hours)
■ Voltmeter (display range: 8 to 18V)
Voltage warning light (setting range 8 to 18V setting unit: 0.1V)
■ Thermometer (display range: 0 to 150 ℃) )
The temperature can be measured at the drain bolt part by purchasing the SP Takegawa drain bolt separately.
Temperature warning light (Setting range: 0 to 150 ° C)
■ Fuel gauge (Display range: 6 levels)
Fuel sensor resistance value preset 100Ω 250Ω 270Ω 390Ω 510Ω 1200Ω
User resistance value setting Resistance value range: 1 to 1500Ω
Fuel warning light
■ Indicator lamp / external switch
■ Indicator lamp
warning light (speed / top gear / mileage / fuel / battery low voltage / temperature / rotation speed * lights when setting items) ・ Neutral lamp ・ High beam lamp ・ Turn lamp ・ Fuel remaining warning lamp ・ ABS lamp ・ Engine Check lamp
■ External switch
Use the external switch attached to the meter for all meter operations and function settings.
The basic functions for the Monkey 125 (speed / temperature unit, genuine tire circumference, ignition setting, fuel) are preset.
■ Backlight
Luminance (Setting range: 1/5 (dark) to 5/5 (bright)
Lighting colors: red, orange, yellow, green, blue, sky, purple, white
■ Notes
HID, LED headlights made by other companies, and fog lamps cannot be installed simultaneously.
Some ballast / inverter (voltage converter) generates high-voltage noise that adversely affects the digital circuit, resulting in product failure or malfunction.
Regarding the gear position setting To set the gear position, both the speed signal and the engine speed signal must be input to the Super Multi DN meter. Therefore, automatic reading work by "actual driving" is necessary.
Do not set gear positions in urban areas because traffic lights and traffic are dangerous.
When driving, select a road with good visibility and check the surrounding road conditions before taking care.
■ Please check before purchasing When you
install our Blaze turn signal set (part number: 05-08-0465 ・ 05-08-0466 ・ 05-08-0467) at the same time, wide range flasher relay (3 poles, actuated) Sound type) Part number 05-08-0433 must be purchased separately.
If you use the wide range flasher relay that comes with the Blaze turn signal, the indicator light for the turn signal may not light properly.